|
Global polyurethane-applications
|
 |
Home > Products > LAMOLTAN®-Half-shells
LAMOLTAN® semi-finished products
|
|
 LAMOLTAN® semi-finished products and polyurethane rigid-foam mouldings can be sawn, cut, nailed, and glued, or simply cemented into place onsite with mortar or hot bitumen.
The very wide range of possible ways in which LAMOLTAN® semi-finished products or polyurethane system mouldings can be used ensure a broad spectrum of applications.
Because of their low weight, they are easier to handle than mouldings made of conventional materials. Designers also appreciate their decorative surfaces, and the almost unlimited range of shapes of which they are capable.
High-quality LAMOLTAN® mouldings and semi-finished products made from the LAMOLTAN® polyurethane systems specially adapted to suit the relevant purpose of use make it possible to execute new ideas and create new shapes without any need to modify the conventional way of working.
|
High-temperature rigid foam (HT) in the range of -30°C to +200°C
High-tech for insulation technology
Advantages are:
Long-term thermal stress:
-30°C to +200°C and for short-term to +250°C
B2, non-glowing, non-melting and is not dropping off whilst burning (DIN 4102)
Thermal conductivity 0,023 – 0,027 W(mk)
Biologically and ecologically harmless
Fields of applications e.g. hot steam pipelines
Form of deliveries:
Blocks, boards, pre-cut parts, mouldings, half-shells |
Information
• Product information
• Prices LAMOLTAN-
half-shells
• HT block foam
|
|
| |
If you have any questions to our products and services:
Send us an eMail. Use our contact form.
We inform you gladly!
|
| |
|
